Commercial screeding contractors
Screeding.com helps main contractors, developers, fit-out teams and commercial clients request screeding quotations for larger or programme-sensitive projects. Drawings, screed type, depth, access and programme are reviewed before a formal quotation is issued.
Based in Gerrards Cross, Buckinghamshire.
Commercial projects we support.
Typical commercial screeding enquiries include offices, retail fit-outs, warehouses and multi-unit residential. Every project is reviewed against drawings, build-up, access and programme before a formal quotation.
Offices
Office floors across new build and fit-out projects, including open-plan areas and cellular layouts.
Retail fit-outs
Retail unit screed for tenant fit-outs, refits and landlord shell improvements.
Warehouse screed
Warehouse and distribution floors where flatness and follow-on finishes are part of the specification.
Industrial units
Light industrial units, workshops and manufacturing floors with defined build-ups.
Schools and education
Education spaces from new teaching blocks to refurbishment of existing buildings.
Healthcare settings
Healthcare and care floors where surface regularity and floor finish readiness are important.
Apartments and multi-unit residential
Apartment blocks and multi-plot residential schemes with repeatable screeding requirements.
New-build developments
Main contractor and developer projects with structured programme and follow-on trade coordination.
Refurbishments
Refurbishment works where existing floors are replaced or reworked to take a new finish.
Landlord and tenant fit-outs
Shell-and-core, Cat A and Cat B fit-outs where screed is part of the demised floor build-up.
Screed types for commercial floors.
Both liquid screed and traditional sand and cement screed are used on commercial projects. The right choice depends on the build-up, area, access, programme and the follow-on finishes.
Liquid screed
- Often considered for larger open commercial areas and continuous pours.
- Can suit floors with underfloor heating where flow around pipework matters.
- Programme planning and follow-on trade coordination are part of the specification.
- Surface preparation and laitance treatment may apply depending on the system and the floor finish.
Sand and cement screed
- Traditional commercial option used across a wide range of build-ups.
- Flexible for falls, access-constrained areas and smaller phased sections.
- Suitable where the specification calls for a bonded, unbonded or floating sand and cement screed.
- Depth and reinforcement are confirmed against the build-up.
Where underfloor heating is part of the specification, see screed over underfloor heating.
What commercial teams usually need to provide.
None of this is required to start a conversation, but the more detail shared up front, the more useful the review and the formal quotation that follows.
Site address or postcode
Helps the team review access, travel and logistics against the wider programme.
Drawings or marked-up plans
Floor plans, GA drawings or sections, marked up with screeded areas where helpful.
Area in m²
Total screeded area, broken down by zone, phase or floor where applicable.
Proposed screed depth
Depth in mm, with overall floor build-up depth where known.
Screed type or specification
Liquid screed, sand and cement screed or a specific specification reference.
UFH details
Pipe layout, system type and installer where underfloor heating is part of the build-up.
Access restrictions
Vehicle access, parking, congestion charges, delivery windows and any pump or hose run notes.
Floor build-up details
Substrate, insulation, membranes and anything else within the floor build-up.
Programme dates
Indicative installation window and key follow-on trade dates.
Floor finish
Tile, timber, vinyl, resin, carpet or other finish and any readiness requirements.
Phasing requirements
Whether the works need to be split into sections, phases or out-of-hours visits.
Site contact details
A site contact for access coordination and project queries.
Programme, access and coordination.
Commercial screeding sits alongside other trades on site. Sequencing, access, pump setup, drying and surface regularity are all considered as part of the quotation rather than left until the day of the pour.
Trade sequencing
Screeding is sequenced with other trades so substrate, services and follow-on works line up around the pour.
Access and parking
Vehicle access, parking and any congestion or delivery restrictions are reviewed against the programme.
Pump setup where applicable
Where pumping is required, the pump position, hose run and setback from the building are planned in advance.
Drying and curing
Drying and curing allowances depend on the screed system, depth and site conditions, and should be confirmed before installation.
Floor finish readiness
Tile, timber, vinyl, resin and carpet each have their own readiness criteria that should be confirmed before installation.
Surface regularity
Surface regularity expectations, typically discussed against SR1, SR2 or SR3, are confirmed at specification stage where required.
BS 8204 discussion
BS 8204 guidance is referenced at specification stage rather than offered as a blanket guarantee.
Commercial screeding and underfloor heating.
Commercial UFH projects need careful coordination between the UFH layout, screed type, cover depth, curing and commissioning. The screed sits between the heating pipework and the finished floor, so its specification has a direct effect on programme and performance.
See screed over underfloor heating for more on screed choice, build-up, drying and commissioning where UFH is part of the project.
Why use Screeding.com for commercial enquiries.
The commercial quotation route is built around the information needed to review and price a screeding project — drawings, screed type, depth, access and programme — rather than a quick estimate based on partial information.
Structured project enquiry
The commercial quotation route captures the details needed to review a project properly rather than guessing on a phone call.
Drawings and document upload
Drawings, BoQs, specifications, UFH layouts and site photos can be uploaded through the commercial quotation route.
Screed type and depth reviewed
Screed type, depth, build-up and floor finish are reviewed against the project before a formal quote is issued.
Access and programme considered
Access, parking, pump setup and programme dates are considered as part of the quotation.
Suitable for larger projects
Larger or more detailed projects are reviewed in the same structured way as smaller enquiries.
Reduces missing details
Helps avoid missing key details at enquiry stage that would otherwise emerge during the works.
Two ways to start a commercial enquiry.
Instant estimate.
Request an indicative estimate for a simple, traditional sand-and-cement floor with known area and depth. The result is non-binding and reviewed before a formal quotation.
Commercial quotation.
Send drawings, bills of quantities, specifications, UFH details, access notes and programme dates for review by the Screeding.com team.
Common questions.
What information is needed for a commercial screeding quote?
Useful details include the site postcode, drawings or marked-up plans, area in m², proposed screed type and depth, floor build-up, any underfloor heating details, access restrictions, programme dates, the intended floor finish and a site contact. The more is shared up front, the more useful the review and the formal quotation that follows.
Can drawings be uploaded for a commercial screeding project?
Yes. The commercial quotation route supports uploading drawings, marked-up plans, bills of quantities, specifications, UFH layouts and site photos so the team can review the project before issuing a formal quotation.
Which screed is best for commercial floors?
Both liquid screed and sand and cement screed are used on commercial projects. The right choice depends on the floor build-up, area, access, programme, follow-on finishes and any underfloor heating. Suitability is confirmed against the specification rather than picked from a generic rule.
Can commercial screeding be phased?
Phased screeding is common on larger commercial projects where access, follow-on trades or occupied areas need the work split into sections. Phasing is discussed at enquiry stage so the screed type, joints and programme can be planned around the wider works.
Is liquid screed suitable for commercial projects?
Liquid screed is often considered for larger open commercial areas and for floors with underfloor heating, where flow around pipework and continuous pours can suit the build-up. Whether it is the right choice depends on the specification, programme and the follow-on finish.
What affects commercial screed drying and floor finish readiness?
Drying and floor finish readiness depend on the screed system, depth, site conditions, ventilation, heating and the requirements of the floor finish above. Timelines are confirmed against the manufacturer and the specification rather than treated as a fixed day count.
Tell us about the commercial screeding project.
Send drawings, area in m², proposed depth, screed type, UFH details if relevant, site access and programme dates. Reviewed by the Screeding.com team before a formal quotation.